Home > Hyperglass® Pool Coating >   Hyperglass Pool Coating - Series 103
Alternative Views:	Smooth as Glass With the power of millions of tiny glass microspheres Hyperglass® Pool Coating sparkles to create a clean and professional-looking finish. Not only do the microspheres make it look great but they also create and extremely hard and smooth surface that won't crack and is impervious to algae, pool chemicals, and cleaning equipment. SPECIFICATIONS   |   MSDS: ENG : ESP 32 Ounces - $14.95 1 Gallon - $59.95 5 Gallons - $275.95 50 Gallon Drums - $2,757.95 Our Price: $59.95 Availability: Usually Ships in 1 to 2 Days Product Code: POOL01 quantity and color color*: First, Select quantity and color                         quantity*: Then, Select quantity and color                         Qty:

Description   Smooth as Glass With the power of millions of tiny glass microspheres Hyperglass® Pool Coating sparkles to create a clean and professional-looking finish. Not only do the microspheres make it look great but they also create and extremely hard and smooth surface that won't crack and is impervious to algae, pool chemicals, and cleaning equipment. Better Products That Make a Better World. Hyperglass is both eco-friendly and energy efficient. Made from non-toxic, non-carcinogenic materials, our coating will not create toxic run-off or leech into pool water. Plus, the added insulation of glass will help keep in heat in the winter and reflect sunlight in the summer.   Video SURFACE PREPARATION - Surface must be clean, dry and free of any foreign matter. A wash with tri-sodium phosphate solution followed by rinsing with water is recommended. Surface must be dry before proceeding. Smooth marble surfaces must be etched prior to coating. Fiberglass and plastic coated hot tubs should be scored with sand paper or acetone. MATERIAL PREPARATION - Thin up to 15% as needed with water. APPLICATION - Hyperflex must be used in combination with Hyperglass Cool Top Coat. Hyperflex may be applied with a roller, sprayer, trowel or brush. Use the largest tip compatible with pump when spraying. Mix thoroughly. Allow 4-6 hours drying time before applying Hyperglass Cool Top Coat. COVERAGE & DRY TIME - Coverage varies depending on surface and porosity. One gallon of paint will cover approximately 33 square feet with 25 mils (.025 inches) of coating. Wait 4-6 hours before applying Hyperglass Cool Top Coat. Cures in approximately 24 hours. CLEAN-UP - Clean-up equipment, tools and spills promptly with warm, soapy water. NOTICE! Do not apply if surface or air temperature is below 50 degrees, or if rain is expected before dry time. Damp or humid conditions will slow dry time. KEEP FROM FREEZING.

 Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item: Hyperglass® Pool Coating Pool Coatings